Jaguar F-Type Forum banner
1 - 11 of 11 Posts

· Registered
Joined
·
1 Posts
Anyone have any insight into good quite aftermarket pads? Jaguar quoted me $1500 for just the fronts alone and I’ll be damned if I pay that when I can do it myself. Thanks!
Seth
[
Just be careful. I replaced my pads and rotors with an after-market brand. The rotors were warped out of the box and had to be replaced with OEM parts that work well for me on track days.
 

· Registered
Joined
·
7 Posts
Anyone have any insight into good quite aftermarket pads? Jaguar quoted me $1500 for just the fronts alone and I’ll be damned if I pay that when I can do it myself. Thanks!
Seth
check out brakeperformance.com..
I got slotted nickel coated front calipers and ceramic brake pads for 300 delivered with lifetime warranty on the pads.. was so happy I got rear ceramic pads for my rear..
Be careful on the front as u will need a new brake pad sensor.. and the rear is little trucky as u have to put the car in maintenance mode .. to Release the electric brakes
 

· Registered
Joined
·
4 Posts
Discussion Starter · #10 ·
check out brakeperformance.com..
I got slotted nickel coated front calipers and ceramic brake pads for 300 delivered with lifetime warranty on the pads.. was so happy I got rear ceramic pads for my rear..
Be careful on the front as u will need a new brake pad sensor.. and the rear is little trucky as u have to put the car in maintenance mode .. to Release the electric brakes
Awesome! Thanks a ton! Is there a way of figuring out what size brakes I have? I have a 2017 F-Type base model so I reckon its the 355mm but I want to be sure before I order anything. Is it possible to cross-reference or reverse engineer it from getting the part number via a dealership?

Seth
 

· Registered
Joined
·
7 Posts
Awesome! Thanks a ton! Is there a way of figuring out what size brakes I have? I have a 2017 F-Type base model so I reckon its the 355mm but I want to be sure before I order anything. Is it possible to cross-reference or reverse engineer it from getting the part number via a dealership?

Seth
when you call them n give them your vin they will verify what size u have.. they specialize in high end cars.. I would recommend doing both front n rear.. after I replaced the front rotors n pads they still felt soft but after I put new pads on the rear the brakes are awe do one now..
I got the black zinc plated slotted rotors and ceramic pads all four.. I know I said nickel plated but I meant zinc 😬
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top